D-Link DMC-920R/E 10/100Base-TX to 100Base-FX Single-Fiber Media Converter (TX: 1310μm; RX: 1550) Part Number: DMC-920R/E G DMC-920R / E - Media Converter / 10 / 100Base-TX to 100Base-FX Single-mode Fiber (20 km, SC) Dual-wavelength Media Converter. The DMC-920R / E media converter converts twisted-pair-to-single-mode optical cable over one fiber interfaces for 10 / 100Base-TX and 100Base-FX Ethernet networks. The DMC-920R can simultaneously transmit and receive signals at 1310 nm and 1550 nm over a single optical fiber for a distance of up to 20 km. The DMC-920R / E media converter uses 1550 nm for receiving data and 1310 nm for transmitting. The media converter is housed in a robust metal case and is equipped with 1 RJ-45 twisted pair port and 1 optical cable port (SC-connector) and can be used as a standalone device or installed in the universal 16-slot media converter chassis - DMC-1000. The media converter is hot-pluggable when used as part of a chassis. The DMC-920R / E supports control functions such as LLCF (Link Loss Carry Forward, Link Pass Through) and LLR (Link Loss Return) for the FX port. When the DMC-920R / E is installed in the DMC-1000 chassis, its special management module (DMC-1002) allows you to monitor the state of the communication channel, operating mode, speed values ​​and counters of received and transmitted packets for both media via SNMP. This module also allows you to set the operating mode, baud rate, enable and disable the LLCF and LLR functions for each physical medium.…

Intelligent PoE Management. When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime. Up to 300 m Long Range PoE Transmission. The distance between IPCs and switch can reach maximum 300 meters. 4/8-Core Adaptive Power Supply with Less Power Loss. 8-core power supply reduces the power loss on cables. 6KV Surge Protection to Improve Reliability in Harsh Environment. The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment. Design for Video Transmission. VIP port ensures important data transmission when network congestion occurs. Port Number 24 × 10/100 Mbps PoE ports, 1 × gigabit RJ45 port, and 1 × gigabit fiber optical port Port Type RJ45 port, full duplex, MDI/MDI-X adaptive Working Mode Standard mode (default); Extend mode Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x Forwarding Mode Store-and-forward switching Ports For Long-Distance Transmission Ports 17 to 24 MAC Address Table 4 K Internal Cache 2.75 Mbits Switching Capacity Businessclaud.com showns Packet Forwarding Rate 6.547 Mpps High Priority Ports Ports 1 to 8 PoE Power Supply PoE Standard IEEE 802.3af, IEEE 802.3at PoE Power Pin End-span: 1/2(-), 3/6(+) Mid-span: 4/5(+), 7/8(-) 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) PoE Port Ports 1 to 24 Max. Port Power 30 W PoE Power Budget 230 W Dialing Function Long Range Ports 17 to 24: up to 300 m; and the speed rate of the port is 10 Mbps.…

STAINLESS STEEL CABLE TIE 8X240MM…

Cisco C891F-K9 Integrated Services Router (ISR) with SFP Cisco C891F-K9 Integrated Services Router (ISR) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as customer premises equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. How the Cisco C891F-K9 Integrated Services Router Addresses Edge Networking Challenges Business Need 890 ISR Feature(s)/Description High availability and business continuity ● Redundant WAN connections for failover protection and load balancing ● Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP) ● Dial backup with external modem through a virtual auxiliary port Consistent, high application performance levels ● The router can run multiple services simultaneously with no performance degradation Risk mitigation with multilevel security ● Network perimeter security with integrated application inspection firewall ● Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption ● Enforced security policy with intrusion prevention ● Security hardware acceleration ● FlexVPN ● Next-generation encryption for secure network communications systems, reliable for the next decade ● Cisco ISR Web Security with Cisco ScanSafe, designed to prevent zero-day malware from reaching corporate networks Feature consolidation for real estate, capital expenditures (CapEx), and management savings ● Supports LAN connections, both Ethernet and Wi-Fi, in one appliance. Contains an integrated 802.11n WLAN access point that supports both autonomous and unified modes, as well as an 8-port LAN switch. Management of both the wired and wireless environments is integrated Unified control of wired and wireless networks from a common console for streamlined operations ● Simplifies and centralizes configuration and management of wireless and wireline devices. Supports WLAN services without requiring a wireless LAN controller Remote configuration and management to keep local IT staff lean ● Supports separate console, auxiliary, and USB ports ● Provides one USB 2.0 flash memory Specifications Product Code C891F-K9 Rack Units 1RU WAN Ports 1-port GE or 1‑port SFP 1-port FE LAN Ports 8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter) 802.11a/g/n Option Yes Cisco CleanAir technology Integrated USB 2.0/AUX/Console Yes DRAM 512MB Flash Memory 256MB Dimensions 4.62 x 32.28 x 24.84 cm (includes rubber feet) 4.45 x 32.28 x 24.84 cm (without rubber feet) Package Weight 4.49 Kg…

Share with friends internet access for up to 10 devices simultaneously 2000 mAh battery for 8 hours of usage Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions Easy management with the tpMiFi App…

MikroTik quickMOUNT Pro | Wall Mount Adapter for Small PtP/Sector Antennas The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device with the included pole adapter, or MikroTik’s small mounting clip (SXT clip adapter) with devices less than 1.5 kg. The adapter is very durable due to it’s special plastic composite material – anvilNITE (TM).…

Features 802.11N SUPPORT Compliant with 802.11n, the Linksys E3000 delivers high speed data transfer and remains compatible with 802.11g and 802.11b devices. SIMULTANEOUS DUAL-BAND Featuring the simultaneous 2. GHz or 5GHz bands, the Linksys E3000 can provides increased bandwidth optimized for smoother and faster HD video streaming, file transfers, and wireless gaming. MIMO TECHNOLOGY The Linksys E3000 features MIMO technology which uses multiple radios to create a robust signal and reduces dead spots to deliver high speed performance and great coverage. HIGH WIRELESS SECURITY The Linksys E3000 supports WPA and WPA2 standards for use of the available supreme encryption regardless of client devices and features a built-in SPI firewall to prevent potential attacks from the Internet. GIGABIT NETWORK CONNECTION The Linksys E3000 features 4 Gigabit LAN ports that provide up to 10x faster speeds than most 100M network connections to handle massive data-flow needs.. Specifications Model Brand Linksys Model E3000 Details Standards IEEE 802.11a/b/g/n Security WPA/WPA2 Personal SPI firewall protection WPA WPA2 WAN Ports 1 x WAN, 4 x 10/100/1000M LAN LEDs Power, USB, Internet, Wireless, Wi-Fi Protected Setup, Ethernet (1-4) Buttons Power, Reset, Wi-Fi Protected Setup Wireless Data Rates Up to 300Mbps Modulation 802.11b: CCK, QPSK, BPSK 802.11g: OFDM 802.11a: OFDM Wireless-N: BPSK, QPSK, 16-QAM, 64-QAM Frequency Band 2.4 GHz / 5 GHz Antenna 6 total, 3 internal antennas per each 2.4GHz & 5GHz radio band Transmitted Power 2.4GHz output power per TX chain 802.11b: Max. 20.5dBm @ All rates 802.11g: Max. 20.5dBm @ Low rates Max. 19.5dBm @ High rates Wireless-N 20MHz: Max. 20.5dBm @ Low rates Max. 18.5dBm @ High rates Wireless-N 40MHz: Max. 17.0dBm @ All rates 5GHz output power per TX chain UNII-1 (5150-5250GHz) 802.11a: Max. 14.0dBm @ All rates Wireless-N 20MHz: Max. 11.5dBm @ All rates Wireless-N 40MHz: Max. 12.0dBm @ All rates UNII-3 (5725-5850GHz) 802.11a: Max. 17.5dBm @ High rates 802.11a: Max. 20.0dBm @ Low rates Wireless-N 20MHz: Max. 17.5dBm @ High rates Wireless-N 20MHz: Max. 20.0dBm @ Low rates Wireless-N 40MHz: Max. 17.5dBm @ High rates Wireless-N 40MHz: Max. 21.0dBm @ Low rates Receiver Sensitivity 2.4GHz 11Mbps: -87dBm @ Typical 54Mbps: -77dBm @ Typical MCS15 (20MHz): -71dBm@ Typical MCS15 (40MHz): -68dBm@ Typical 5GHz 54Mbps: -74dBm @ Typical MCS15 (20MHz): -68dBm@ Typical MCS15 (40MHz): -65dBm@ Typical Interface USB 2.0 Wireless Adapter included No Dimensions 8.86" x 7.09" x 1.38" Weight 1.00 lbs. Temperature 0°C - 40°C (32°F - 104°F) Humidity 10% - 80% Features Features The Power of Dual-Band: A Wireless-N router with simultaneous 2.4 and 5 GHz bands designed to increase bandwidth. Optimized for smoother and faster HD video streaming, file transfers, and wireless gaming. Quick to Install: Cisco Connect Software has three simple steps to get you set up and your secure Wireless-Network is ready to go. A streamlined user interface allows you to choose from simple to advanced settings with no hassle. You're in Control: Cisco Connect software helps you customize your settings, quickly add multiple Internet devices to your network: Create a separate, secure, password protected network for guests Limit access time and websites with Parental Controls Easily access advanced network settings Keep Wi-Fi freeloaders and Internet threats at bay with customizable security settings, including WPA/WPA2 Personal and SPI firewall protection Built-in UPnP AV Media Server: Built-in AV media server streams entertainment content. The USB port provides connectivity to storage devices for file sharing at home or over the Internet.…

The Ubiquiti Ufiber UF-GP-B+ GPON OLT SFP Transceiver increases the capacity of your UFiber OLT to connect your new customers quickly.…

Description Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 Ultra-lightweight design with proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. This Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 CPE features adjustment flexibility in three axes for versatile mounting options. The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio Features Access Point PtMP airMAX Mixed Mode airMAX ac Protocol Support Long-Range Point-to-Point (PtP) Link Mode Selectable Channel Width PtP: 10/20/30/40/50/60/80 MHz PtMP: 10/20/30/40 MHz Automatic Channel Selection Transmit Power Control: Automatic/Manual Automatic Distance Selection (ACK Timing) Strongest WPA2 Security…

Type a description for this product here...…

Overview Manage your UniFi networking and video devices simultaneously with the new multi-application UniFi Cloud Key G2 Plus. Designed for easy deployment, the Cloud Key G2 Plus can be quickly configured over Bluetooth using the UniFi mobile applications. The front panel display shows vital system stats for your UniFi networking hardware and UniFi Protect video cameras. A built-in battery provides protection against power loss. For video storage, it also includes a 1 TB HDD, which is upgradeable to 5 TB. Specifications Dimensions : 131.16 x 27.10 x 134.20 mm Weight : 582 g Enclosure : Anodized Aluminum Management Interface : UniFi Management Portal; UniFi SDN; UniFi Protect Hard Drive Capacity : 1 TB 2.5" SATA HDD (user-upgradeable) Device Capacity: UniFi Protect Mode: Up to 20 UniFi Cameras UniFi SDN + UniFi Protect : Up to 15 UniFi Cameras and 50 UniFi Devices Processor : APQ8053 8 Core with 3 GB RAM eMMC Memory: 32 GB Networking Interface : (1) 10/100/1000 Ethernet Port Buttons : (1) Power; (1) Reset LEDs: (1) Power, White/Blue Power Method : Standard 802.3af PoE; Quick Charge 2.0/3.0 Power Adapter (9VDC, 2A) Supported Voltage Range : Standard 802.3af PoE or 9VDC, 2A Max. Power Consumption : 12.95W (PoE); USB-C Power Operating Temperature: 0 to 35° C Operating Humidity : 20 to 80% Noncondensing Certifications : CE, FCC, IC Download datasheet here…

Extralink Fiber Adapter SC/UPC, Multi-Mode, Simplex Fiber optic adapters (also known as bulkheads) are used to join two fiber optic patch cables together. They are available for use with either single mode or multimode patch cables. Area of Applications: Telecom network CATV network Ethernet network Optical communication equipment Product specification Operating Temperature [°C] :-40 to +75°C Storage Temperature [°C] :-40 to +120°C Repeatability [dB] :≥1000 times Plug and unplug force [g/f] :200-600G Insertion Loss [dB] :0.2…

Boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly Compatible with 802.11 b/g/n and 802.11ac Wi-Fi devices Dual band speeds up to 750Mbps Miniature size and wall-mounted design make it easy to deploy and move flexibly Ethernet port allows the Extender to function as a wireless adapter to connect wired devices…

D-Link Cat6 FTP 23 AWG PVC Solid Cable - 305m/Roll - Grey Colour Part Number: NCB-C6SGRYR-305 4 Pairs Foilded Twisted Pair (FTP) Cable Conductor Metal: Solid Bare Copper with 23 AWG Shield: Aluminum Polyester Foil Color Code: Gray Drain Wire: 26 AWG Jacket Material: PVC UL94V-0 PE Central Cross separator Mutual Capacitance: 5.6nF/100m nominal Characteristic Impedance: 100±15>#/li### Nominal Velocity of Propagation: 69>#/li### Conductor Resistance: 9.38/100m Mutual Capacitance: 5.6nF/100m Resistance Unbalance: 5% Max Capacitance Unbalance: 330pF/100m Delay Skew: 45nS Conductor Diameter: 0.560mm Nominal Insulation Diameter: 1.14 Nominal Insulation Material: HD-PE Cable Diameter : 7.00mm Nominal Product Datasheet…

Material: PVC Size: 4" x 2" (100mm by 50mm) Standard: 2.5m length…

50 Pair Telephone Box can be easily wall mounted and has three-wire insertion holes. Features: • Key hanger inside • Easy to install • Dimensional accuracy • Operating fluency…

Mikrotik RB850Gx2 Dual Core P1023 533MHz CPU, 512MB RAM, 5xGigabit Ethernet, RouterOS L5 The RB850Gx2 is a five port Gigabit ethernet router. Comparing to the RB450G, the RB850Gx2 is much faster, with a dual core CPU, yet it still retains the same form factor, and will fit into the same enclosures. The device is powered by a 533MHz P1023 PPC CPU, and also includes a temperature sensor and voltage monitor. Specifications Details Product code RB850Gx2 Architecture PPC CPU P1023NSN5CFB CPU core count 2 CPU nominal frequency 533 MHz Dimensions 90mm x 115mm RouterOS license 5 Operating System RouterOS Size of RAM 512 MB Storage size 512 MB Storage type NAND Tested ambient temperature -40°C to 70°C MTBF Approximately 200'000 hours at 25C Suggested price price shown Powering Details PoE in Passive PoE PoE in input Voltage 8-28 V Number of DC inputs 2 (DC jack, PoE-IN) DC jack input Voltage 8-28 V Max power consumption 8 W FAN count Passive Ethernet Details 10/100/1000 Ethernet ports 5 Peripherals Details Memory card type microSD Memory Cards 1 Serial port RS232 Other Details CPU temperature monitor Yes PCB temperature monitor Yes Voltage Monitor Yes…

The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber Businessclaud.com negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Businessclaud.com port supports MDI / MDI-X auto crossoverSupporting flow controlSupporting 1552 Byte packetInternal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt Businessclaud.com of internal or external power supply for selection by users Specification Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FXMAC address table: 1KConnector: UTP: RJ-45 10/100Mbps;Fiber: SC 100MbpsCable: UTP: Cat. 5 UTP (the max distance up to 100m)Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)Flow Control Full Duplex: IEEE802.3xHalf Duplex: BackpressureLED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Businessclaud.com: AC 110V - 220V to DC 5V; DC48V to DC 5VAmbient temperature:0 ~ 50℃Storage temperature:-20 ~ +70℃Humidity: 5% ~ 90%Dimensions: Internal power: 30x110x140mmExternal power: 26x70x93mm…

SYSTEM REQUIREMENTS Computer with: Windows 2000 (SP4), XP (SP2), or Vista (32 or 64-bit) or higher CD-ROM drive,20MB hard disk space, Available USB port STANDARDS : IEEE 802.11g, IEEE 802.11b FREQUENCY RANGE : 2.4GHz to 2.4835GHz @ EIRP: 18dBm ANTENNA: Integrated Antenna 0dBi SECURITY: 64/128-bit WEP data encryption,Wi-Fi Protected Access (WPA/WPA2-PSK, WPA/WPA2-EAP), 802.1x OPERATING VOLTAGE: 5VDC +/- 5% DATSHEET…

What This Product Does The 48-Port Gigabit Switch TL-SG1048 is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. A reliable, easy-to-use switch without the complexity of management, the TL-SG1048 provides 48 10/100/1000Mbps ports. The TL-SG1048 combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price. TP-Link Green Technology This new generation 48-Port Gigabit Rackmount Switch TL-SG1048 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled. Ease of Use The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Compact size shell make it ideal for desktops with limited space while it is also Rackmountable, convenient and safe. Dynamic LED lights provide real-time work status display and basic fault diagnosis. High Performance The TL-SG1048 features non-blocking wire-speed architecture with a price showns switching capacity for maximum data throughput. An 8K MAC address table provides scalability for even the largest networks. It also supports 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission. Key Features Innovative energy-efficient technology saves power consumption 100% Data filtering rate eliminates all error packets Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode Non-blocking switching architecture forwards and filters packets at full wire-speed for maximum throughput price showns Switching Capacity Auto MDI/MDIX eliminates the need for crossover cables Supports MAC address auto-learning and auto-aging Support the port N-Way Auto-Negotiation, Store and Forward. Compact size design for desktops, Rackmountable Plug and Play design simplifies installation…

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack. Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. Specifications Details Product code CRS212-1G-10S-1S+IN Architecture MIPSBE CPU QCA8519 CPU core count 1 CPU nominal frequency 400 MHz Dimensions 200 x 142 x 44 mm License level 5 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -40°C to 70°C Suggested price price shown Powering Details Number of DC inputs 1 (DC jack) DC jack input Voltage 8-30 V Max power consumption 20 W FAN count Passive Ethernet Details 10/100/1000 Ethernet ports 1 Fiber Details SFP ports 10 SFP+ ports 1 Peripherals Details Serial port RJ45 Other Details Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE/RED, EAC, ROHS…

Siemon's fully shielded Category 7A 1000 MHz end-to-end cabling solution is the highest-performing, most secure twisted-pair copper cabling system available. Siemon's Category 7A 1000 MHz SFTP cable perfectly complements the performance of the TERA outlet exceeding all ISO/IEC requirements for Category 7A/Class FA transmission performance. A fully shielded cable with individual foils around each pair coupled with a high screen coverage outer braid provides perfect immunity from outside interferences. In addition, the cable jacket has been qualified for mechanical reliability in high temperature environments up to 75°C. In PoE remote power applications, this cable can be installed in environments up to 60°C and will not experience degradation due to heat rise inside the cable bundle. Further, this 7A cable is capable of running multiple lower speed applications, known as cable sharing, from one drop. Siemon cable is the ideal way to ensure optimum channel performance and is essential for a complete end-to-end warranted solution.…

DINTEK PowerMAX TM Cat.6 Patch Panels are designed to exceed ANSI/TIA-568-2.D performance specifications and support both T568A and T568B wiring schemes. They can be terminated with an industry standard 110 or krone installation tool. The panels include a mounting slot for the DINTEK cable management bar, which easily mounts to the back of the panel, for improved routing and strain relief functionality. Combined with other DINTEK PowerMAX TM products, they are the perfect solution to your voice and data communications needs. Features Component level design Meets & exceeds all current Cat.6 standards Stripped window label for easy management 110 and krone dual type IDC termination 19” 24 port patch panel, 1U size & 48 port panel, 2U size Accepts 22~26AWG, stranded or solid wire Optional rear cable management Applications Voice; T1; ISDN 10BASE-T (IEEE 802.3) 16Mbps Token Ring (IEEE802.5) 100VG-AnyLAN (IEEE802.12) 100BASE-T Ethernet (IEEE802.3) 155/622Mbps 1.2/Businessclaud.com showns ATM 1000Mbps Gigabit Ethernet 550MHz Broadband Video Standards Conformance ETL verified ISO/IEC11801 2nd edition ANSI/TIA Standard 568-2.D CENELEC EN 50173 Independent Verified Certifications ETL Certificate of Conformance…

•3G WAN failover allows mobile internet connection to take over if the wired Internet connection is lost • Load sharing allows Internet bandwidth to be distributed between a wired and a mobile Internet connection, easing network congestion • QoS (Quality of Service) optimizes data traffic to give you the best Internet experience…

Ubiquiti PoE Injector (PoE-24-24W-G) | 24VDC, 24W, Gbit Ubiquiti Networks PoE injector for 24V devices offering up to 24W of power. Offers connection speed of up to price showns. It works great with Rocket M5 and UniFi access points, with ESD protection.…

Wireless modem wifi pro 5g lte... get your internet with a sim card ... supports all networks…

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well. Product specifications Details Product code S+31DLC10D Connector Dual LC UPC Data Rate 10G Distance 10km Format SFP+ Mode SM Tested ambient temperature -40 to +70C Wavelength 1310nm…

Overview Indoor/Outdoor airMAX ® CPE Featuring a panel antenna and dual-polarity performance, the NanoStation ® M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. Compact CPE Design The NanoStation ® M features the CPE design that expanded the global Wireless ISP industry. Plug and Play Installation The NanoStation ® M requires no tools for assembly; only a single wrench is required for pole-mounting. Versatile Application Use The NanoStation ® M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX ® CPE. Dual Ethernet Connectivity With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration. Powerful airOS ® Features Ubiquiti’s versatile airOS ® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services. Advanced Software Technology Ubiquiti’s airMAX ® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Technical Specifications Frequency: 5 GHZ Throughput: 150Mbps Range: 10km Power Supply (POE): 24V, 0.5A Max. Power Consumption: 5.5W Operataing Frequency: 5170-5875 MHz Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) Gain: 13 dBi Networking Interface: (1) 10/100 Ethernet Ports Processor Specs: Atheros MIPS 74Kc, 560 MHz Memory: 64 MB DDR2, 8 MB FlashFrequency : 5 GHz Cross-pol Isolation : 20 dB Minimum Max. VSWR: 1.4:1 Beamwidth: 45° (H-pol) / 45° (V-pol) / 45° (Elevation) Polarization : Dual Linear Enclosure: Outdoor UV Stabilized Plastic Mounting: Pole-Mount Operating Temperature: -30 to 75° C Operating Humidity : 5 to 95% Noncondensing Wireless Approvals : FCC Part 15.247, IC RS210, CE RoHS Compliance : Yes Shock & Vibration : ETSI300-019-1.4 View datasheet here…

OVERVIEW 10/100Mbps Single-Mode Media Converter Complies with 802.3u 10/100Base-TX, 100Base-FX standards Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 12.5 miles (20km) What This Product Does The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media and vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 12.5 miles (20km). TECHNICAL SPECIFICATIONS Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Half/Full-Duplex transfer mode for FX port Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 12.5 miles (20km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Single-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing…

100Base-TX UTP to 100Base-FX SM SC Fast Ethernet Fiber Media Converter (Up to 30km) Businessclaud.com…