Brand: Cisco…

Features Superior Range – High power amplifiers and high-gain antennas provide enhanced wireless range up to price shown sq ft. Wall-Penetrating Wi-Fi – Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones 3 Modes Functionality – Offers three wireless modes, including Router, Range Extender, and Access Point 450Mbps Wireless Speed – Ideal for video streaming, online gaming and VoIP Specifications Standards Wi-Fi 4 IEEE 802.11n/b/g 2.4 GHz WiFi Speeds N450 2.4 GHz: 450 Mbps (802.11n) WiFi Range 4 Bedroom Houses 3× Detachable 9 dBi High-Gain Antennas Multiple antennas form a signal-boosting array to cover more directions and large areas High-Power FEM Improves transmission power to strengthen signal coverage WiFi Capacity Legacy Working Modes Router Mode Access Point Mode Range Extender Mode HARDWARE Processor Single-Core CPU Ethernet Ports 1× 10/100 Mbps WAN Port 4× 10/100 Mbps LAN Ports Buttons Wi-Fi On/Off Button Power On/Off Button WPS Button Reset Button Power 12 V ⎓ 1.5 A…

Overview D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. Technical Specifications Supplies PoE/PoE+ up to 30 Watts Gigabit connection Plug-and-Play installation Compact design with mounting brackets…

25mm Rigid PVC Conduit…

Brand: Generic…

TP-Link Archer MR200 AC750 733Mbps Dual Band 4G LTE Mobile Wi-Fi Router, SIM Slot Unlocked, No Configuration Required, Removable Wi-Fi Antennas…

OVERVIEW The DGS-1210 Series is the latest generation of D-Link® Gigabit Web Smart Switches featuring D-Link Green 3.0 technology. The switches comply with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configuration features ensures your network remains protected after an upgrade from IPv4 to IPv6. By offering multiple management options, these switches allow quick deployment, infrastructure expansion, and seamless upgrades. Targeting small and medium sized businesses, the DGS-1210 Web Smart switches provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series switches support 8, 16, 24, or 48 10/100/1000BASE-T ports. In addition, each switch supports 2 or 4 Gigabit SFP ports for optical connections using multimode or singlemode SFP transceivers. PoE Support Several models in the DGS-1210 series family support Power-over-Ethernet capabilities, simplifying deployments with IP cameras, VoIP phones, wireless access points, and other powered devices. These models include the DGS-1210-10P, DGS-1210-28P and DGS-1210-52MP. Using the switch’s management interface, an administrator can control various PoE functions, such as remotely rebooting cameras or access points, from anywhere on the network, including over the Internet. The switches also support time-based PoE – an option that allows administrators to set a time window that determines when each port’s PoE power is turned on and off. Energy Saving The DGS-1210 Series Switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low. For environments not fully supporting the standard, these switches offer advanced powersaving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom time profiles. The time profiles can also be applied to the PoE switches so that unnecessary power consumption can be saved during off hours. The switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Easy Management The D-Link Web Smart Switch series is designed for easy management. All configuration can be performed through an intuitive browser-based Graphical User Interface regardless of the host PC’s operating system. The DGS-1210 Series switches also support a D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. This utility allows customers to easily discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup by taking switches, within the same L2 network segment, that are connected to the user’s PC, and displaying them on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices, including password changes and firmware upgrades. In addition, the DGS-1210 Series supports D-View® 6.0 and Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. Auto Surveillance VLAN and Voice VLAN The D-Link Web Smart series automates the process of setting up IP surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of realtime video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at a high level. Similarly, the Auto Voice VLAN guarantees clear quality and efficient transmission for all voice communication. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. KEY FEATURES • 48 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Support POE Power Budget up to 370 W • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem TECHNICAL SPECIFICATIONS Interfaces • 48 x 10/100/1000 Mbps PoE ports • 4 x Gigabit SFP ports Port Standards & Functions • Ports 1 to 48 compliant with 802.3at Other Port Standards & Functions • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) • IEEE 802.3az compliance • Auto-negotiation • IEEE 802.3x Flow Control • IEEE 802.3z Network Cables • UTP Cat. 5, Cat. 5e (100 m max.) Duplex Mode • Full/Half-duplex for 10/100 Mbps • Full-duplex for 1000 Mbps Media Interface Exchange • Auto MDI/MDIX adjustment for all twisted-pair ports Dimensions (L x W x H) • 440 x 430 x 44 mm (17.32 x 16.9 x 1.73 in) Weight • 6.52 kg (14.37 lbs) Diagnostic LEDs • Link/Activity/Speed (per 10/100/1000 Mbps port) • Power Fail/Power Ok (per PoE port) DATASHEET…

Key Features Up to 450Mbps + Businessclaud.com showns IEEE 802.11ac, IEEE 802.11a/b/g/n Smart Wi-Fi Apps, tools and mobility, Beamforming Technology Best-in-class HD video streaming USB 3.0 & USB 2.0 port; 4 Gigabit ports 1 year limited warranty…

Model: Tray 6450…

Desktop/Rackmount Load Balance Broadband Router Up to 4 WAN 10/100 ports for multiple Internet connections. Load balancing by bandwidth distribution, by type of application, or simply failover when the main connection is disturbed . Web interface portal authentication evaluate and authenticate all the accesses to the Internet for better access and bandwidth management Marshals bandwidth resource to specific clients based on their unique application environments.…

If you are looking for a single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind. This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other price showns devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management. CRS354-48P-4S+2Q+RM is extremely functional, and it has the best price-point on the market – it will make the perfect addition to a professional setup. The total non-blocking throughput is price showns, switching capacity is price showns and the forwarding rate reaches 235 Mpps. Specifications Details Product code CRS354-48P-4S+2Q+RM Architecture MIPSBE CPU QCA9531 CPU core count 1 CPU nominal frequency 650 MHz Dimensions 443 x 382 x 44 mm License level 5 Operating System RouterOS Size of RAM 64 MB Storage size 16 MB Storage type FLASH Tested ambient temperature -20°C to 60°C Suggested price price shown Powering Details Number of AC inputs 1 AC input range 100-240 Max power consumption 800 W Max power consumption without attachments 85 W FAN count 4 PoE-out Details PoE-out ports Ether1-Ether48 PoE out 802.3af/at Max out per port output (input 30 V) 1000 mA Max out per port output (input > 30 V) 570 mA Total output current 27A at 26V OR 13.2A at 53V Total output power 700W Ethernet Details 10/100 Ethernet ports 1 10/100/1000 Ethernet ports 48 Fiber Details SFP+ ports 4 Number of 40G QSFP+ ports 2 Peripherals Details Serial port RJ45 Other Details CPU temperature monitor Yes Current Monitor Yes PCB temperature monitor Yes Voltage Monitor Yes Certification & Approvals Details Certification CE/RED, EAC, ROHS…

OVERVIEW The D-Link DGS-1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1210 Series provides a cost-efficient and flexible solution for expanding any business network. The DGS-1210-52MP is a PoE Smart Managed Switch that provides 48 10/100/1000 Base-T PoE ports with 4 Gigabit SFP/RJ45 Combo ports. Seamless Integration The DGS-1210 Series includes a wide range of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps combo ports, and 100/1000 Mbps SFP ports, allowing you to choose the most suitable media type for your requirements. The DGS-1210-52MP switch comes with 48 PoE Gigabit copper ports capable of connecting to existing Cat.5 (or higher) twisted-pair cables. Additionally, the last 4 ports of the DGS-1210-52MP offer either RJ45 or SFP connectivity and therefore provide an option for upstream or downstream server connections via fibre interface. Using the default presets, the administrator can quickly set up the switch without reconfiguring any settings. PoE Support All DGS-1210 Series PoE switches include support for IEEE 802.3af/at and higher power budgets, allowing more PoE devices to be powered by the switch and for devices to be installed in remote locations without immediate access to power outlets. The DGS-1210-52MP delivers Power over Ethernet (PoE) capabilities, making deployment with IP cameras, VoIP phones, and access points much easier. The DGS-1210-52MP complies with the 802.3af (PoE) and 802.3at (PoE+) standards and supports a 370 Watt power budget. Extensive Layer 2 Features Equipped with a complete lineup of L2 features, the DGS-1210-52MP includes IGMP Snooping, Port Mirroring, Rapid Spanning Tree and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature, designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality. Automatic Confguration The DGS-1210 Series supports Auto Voice VLAN and Surveillance Mode, which allow voice and video traffic to be automatically identified and handled differently to regular network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, increasing security and allowing Quality of Service (QoS) to be applied. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1x port-based authentication, allowing the network users to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210-52MP switch includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARPmessages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment. Versatile Management The DGS-1210-52MP can be managed with the D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them on-screen for instant access. This allows for simultaneous configuration and basic setup of all discovered devices, including password changes and firmware upgrades. The DGS-1210 Series also supports D-View and Command Line Interface (CLI) through Telnet. D-View 7.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. KEY FEATURES • 48 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Support POE Power Budget up to 370 W • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem TECHNICAL SPECIFICATIONS hardware Interface 48-port 10/100 / 1000Base-T with PoE 4-port 1000Base-X SFP Automatic MDI / MDIX on all ports Indicators Link / Activity / Speed(on port 10/100 / 1000Base-T) Network Cables UTP Category 5, 5e (max. 100 m) Performance Switching matrix 104 Gb / s Switching Method Store-and-forward MAC-address table 16K entries per device Speed forwarding 64-byte packets 77,4 Mpps Packet buffer 3 MBThe amount of RAM 128 MBFlash-memory 16 MB DATASHEET…

Brand: TP-Link…

Mikrotik RB260GSP is a small SOHO switch which features power output on ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The RB260GSP has five Gigabit Ethernet ports and one SFP cage switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products - SwOS. MikroTik SwOS…

DH-PFS4226-24ET-360 is a dedicated PoE switch designed especially for the security industry. The PoE management function displays power control and real-time port consumption. The switch uses LD PoE technology to transmit power and data up to 250 m (820 ft). LD PoE extends transmission distances beyond the industry-standard 100 m, even with third-party PoE-compliant cameras. Features Layer 2 Managed PoE Switch Supports PoE, PoE+, and Hi-PoE (use with PFT1300 PoE Extender) 360 W PoE Budget 250 m (820 ft) PoE Transmission PoE Management, PoE Setting/Event Statistics/Green Po Search and Upgrade via Configuration Tool High Lightning Protection Design Non-blocking Video Transmission…

Model: AF-5G34-S45 Frequency: 5.1 – 5.9 GHz Gain: 34 dBi The AF-5G23-S45 offers 34 dBi of gain and features the following advantages: • Low sidelobes reduce interference from other transmitters in the area. • High isolation enhances performance for co-location in tower-mounted installations. • The low-profile design with integrated radome reduces wind-loading. The Ubiquiti airFiber X Antenna AF-5G34-S45 features significant advances in noise isolation and beam performance to complement the airFiber X radios for carrier backhauls and Point-to-Point (PtP) bridging. The airFiber® 5X Antennas feature significant advances in noise isolation and beam performance to complement the airFiber X radios for carrier backhauls and Point-to-Point (PtP) bridging. You can pair an airFiber® X antenna with an airFiber X radio to create the endpoint of a high-performance, Point-to-Point (PtP) bridge or network backhaul (airFiber X radio sold separately).The airFiber X antenna uses the 5 GHz frequency band. Powerful Performance The Ubiquiti airFiber X Antenna AF-5G34-S45 delivers 2×2, dual-polarity performance. On the right is one example of how the airFiber X antenna with an airFiber X radio can be deployed as endpoints in a backhaul link to deliver bandwidth from a WISP network out to a neighborhood tower. From there, an airMAX® Sector antenna with a Rocket® radio delivers bandwidth to the WISP’s customers. Carrier-Class Construction Incorporating a dish reflector design for excellent beam directivity, the airFiber X antennas feature robust mechanical design using industrial-strength hardware for outdoor application use. Plug and Play Integration airFiber X antennas and airFiber X radios have been designed to seamlessly work together. Every airFiber X antenna has a built-in airFiber X radio mount, so installation requires no special tools. Snap the airFiber X radio securely into place and mount the antenna; you then have the optimal combination of airFiber X antenna and airFiber X radio for your PtP application.…

24 Port fiber tray With SC simplex adapters, /SC 24 Port (Core) Simplex Plate/ Multi mode with 24 Beige SC Adapters Loaded 24 Port SC Single Mode Patch Panel Kits, Ready…

The D-Link DWR-711 Wireless N300 3G Router is a cost efficient solution that allows users to access mobile broadband networks. Once connected, users can transfer data, stream media, and send SMS messages. Simply insert your HSPA+ SIM card and share your 3G Internet connection through a secure wireless network or by using any of the three 10/100 Ethernet ports. Connect to your HSPA+ mobile connection with fast downlink speeds of up to 21 Mbps and uplink speeds up to 5.76 Mbps, which gives you the speed you need for fast, responsive Internet access. Surf the web with ease, and stream music and video over the Internet to your PCs and mobile devices. The DWR-711 utilizes dual active firewalls (SPI and NAT) to prevent potential attacks over the Internet. WPA/WPA2 wireless encryption keeps your wireless network secure and your traffic safe, allowing you to share your 3G connection without worrying about unauthorized users accessing your network. The Wireless N300 3G Router can be installed quickly and easily almost anywhere. It can be configured through almost any web browser without the need for special software. This router makes it stay connected even when conventional broadband services are unavailable.…

Material: PVC Size: 1" x1" (25mm by 25mm) Standard: 2.5m length…

The Cisco Catalyst 3850-48F-S Switch provides capabilities that ideally suited to support the convergence of wired and wireless access. The new Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility, and application optimization. This convergence is built on the resilience of the new and improved Cisco StackWise-480 technology. The Cisco Catalyst 3850-48F-S Switch supports full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power Over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ-45 and fiber-based downlink interfaces, and redundant fans and power supplies. Product Overview ● Integrated wireless controller capability with support for up to 100 access points and 2000 wireless clients on each switching entity (switch or stack) ● 48 10/100/1000 Ethernet PoE+ [800W] ports with Energy-Efficient Ethernet (EEE) ● Cisco StackWise-480 technology provides scalability and resiliency with price showns of stack throughput ● Cisco StackPower technology provides power stacking among stack members for power redundancy ● Full IEEE 802.3at (PoE+) with 30W power on all copper ports in 1 Rack Unit (RU) form factor ● 715WAC power supply 1 RU ● IEEE 802.3bz (2.5/5 G/s BASE-T) to go beyond 1 Gb/s with existing Cat5e and Cat6 ● IEEE 802.1ba AV Bridging (AVB) built-in to provide better AV experience for including improved time synchronization and QoS ● Software support for IPv4 and IPv6 routing, multicast routing, modular Quality of Service (QoS), Flexible NetFlow (FNF), and enhanced security features ● Single universal Cisco IOS Software image across all license levels, providing an easy upgrade path for software features ● Cisco DNA services delivered through Cisco ONE ™ Software, providing simplified, high-value solutions with license portability and flexibility ● Support for AES-256 with the powerful MACSEC 256-bit for SFP+ and Multigigabit models and 128-bit encryption algorithm available on all models ● Enhanced Limited Lifetime Warranty (E-LLW) with Next Business Day (NBD) advance hardware replacement and 90-day access to Cisco Technical Assistance Center (TAC) support…

The Light Head Grid (LHG 5) is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna The LHG 5 is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol The LHG 5 grid design ensures protection against wind The fact that the antenna element is built into the wireless unit means no loss on cables…

Mikrotik hEX lite (RB750r2) 5x Ethernet port router 850MHz CPU, 64MB RAM, 16 MB storage size, RouterOS L4 Includes 12V 0.5A power adapter Dimensions are 113x89x28mm and Weight without packaging and cables is 129g Perfectly fits into any SOHO environment…

STAR BITS: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H Hex key bits: 5/32", 9/64", 1/8", 7/64", 3/32", 5/64" Hex bits: 2, 2. 5, 3, 4, 5, 6mm Spanner bits: 4, 6, 8, 10mm TORQ SET BITS: 6, 8, 10mm 60mm magnetic bit holder Torque screwdriver Set: T10, T15, T20, T25 5 piece socket: 3/16", 1/4", 5/16", 11/32", 3/8"…

Ceiling Access Point - RouterBoard cAP AC-US Dual-band 2.4 / 5GHz The cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. Mount on a ceiling or wall Two Gigabit Ethernet ports (one with PoE output)…

The Giganet Cabling solution products have been designed and manufactured to top International standards for end-to-end Category 6 UTP installations in both horizontal and backbone areas. The Giganet 4 pair UTP RJ45 patch leads are manufactured from stranded conductor cable and verified to Cat 6 TIA/EIA-568-B.2-1 standards. Available for flexible and cost effective Cat 6 installations. The Giganet Category 6 patch cords when used with high performance Giganet Category 6 connectivity (solid UTP cable, patch panels and work area outlets) provide superior performance capabilities of high bandwidth applications support. Unshielded 4 pair twisted multi-stranded cable Colours: grey, blue, green, red and yellow ½m, 1m, 3m and 5m lengths available from stock Highly flexible Jacket: 0.453mm 75°C PVC Insulation: 0.153mm polyolefin Stranded copper conductor Unshielded 8P8C Plugs Meets all requirements for Gigabit Ethernet ISO/IEC 11801 transmission requirement for stranded wire UL, CSA & ETL verified Tested and verified to TIA/EIA -568-B.2-1 Moulded strain-relief boots 50 micron gold plated RJ45 connector Individually packed in Poly bag Suitable for high density Blade Network equipment…

Overview WMPFSE The Panduit® PatchLink® Horizontal Cable Manager manages category 5e and 6 copper, fiber optic and coaxial cables on the front and rear of any standard 19in (483mm) EIA rack or cabinet. Flexible fingers not only provide a safe integral bend radius but simplify adds, moves and changes for an easy-to-maintain finished, professional finish. Front Only Cover, ABS, 1RU, Black, 1pc, Black. Specifications Product Type Single Sided Manager Body Material ABS Orientation Horizontal Cover Material PVC D-Ring Material NA Finger Material ABS Overall Height (In.) 1.7 Overall Height (mm) 44.1 Overall Width (In.) 19 Overall Width (mm) 483 Overall Depth (In.) 3.7 Overall Depth (mm) 93.7 Number of Rack Units 1 Sub Brand PatchLink Color Black Standards Met RoHS For Use With NA Includes Manager, cover, hardware kit Number of Rack Spaces 1 Material ABS CE Compliant NA CE Marking NA Compatibility NA D-Ring Size NA Read more below Single Sided Manager…

Type a description for this product here...…

Buy the Businessclaud Ubiquiti UniFi UAP-AC-M AC Mesh Wide-Area Indoor/Outdoor Access Point from Businessclaud for genuine quality and reliable products. We provide authentic products with full warranty, fast nationwide delivery, and dedicated customer support.…

Overview The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Based on the IEEE 802.3ab and 802.3z standards, the DMC-700SC is designed for use with multi-mode fiber cable utilising the SC-Type connector. The DMC-700SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate. Other features of this module include the ability to be used as a standalone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The DMC-700SC will transmit at extended fiber optic distances utilising multimode fiber up to 550 meters. Technical Specifications LED Indicators Power (PWR) LINK/ACT Dimensions 120 x 88 x 25 mm Power Input 7.5V 1.5A Through external AC power adapter Operating Temperature 0° - 40° C Storage Temperature -25° - 70° C Humidity 10 ~ 90% non-condensing Emission (EMI) FCC Class B VCCI Class B CE Class B C-Tick…

OVERVIEW 10/100Mbps Multi-Mode Media Converter Complies with 802.3u 10/100Base-TX, 100Base-FX standards Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 1.2 miles (2km) What This Product Does The MC100CM is a media converter designed to connect 100BASE-FX fiber to 100Base-TX copper and vice versa. Complies with IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed using multi-mode fiber cable with an SC-Type terminal for physical connections. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode for flexibility. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 1.2 miles (2km). TECHNICAL SPECIFICATIONS Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x Basic Function Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Full Duplex Flow Control (IEEE 802.3x) Half Duplex Flow Control (Backpressure) Extends fiber distance up to 1.2 miles (2km) Ports 1 100M SC/UPC port 1 10/100M RJ45 port (Auto MDI/MDIX) Wave Length 1310nm Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Network Media 100BASE-FX Multi-mode Fiber LED Indicators PWR, Link/Act Dimensions (W*D*H) 3.7 × 2.9 × 1.1 in. (95 × 73 × 27 mm) Power Supply External power supply Max Power Consumption 2.4W Safety & Emission FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing…